How to Replace a SAAB Key Fob
A key fob that isn't working properly can cost you a few hundred dollars at a retail store. You can repair it yourself and save money.
You'll need a flathead screwdriver to open the case and access the electronic. It is also recommended to have a multimeter on hand to test the battery.
Battery
Most key fobs will activate when you press a button either to unlock or lock the vehicle (or to start it in the case of keyless ignition). This is due to the fact that they have a battery inside that sends an electronic signal to the vehicle to inform it that you're close enough to be able to press the starter button. If the fob starts to behave in a non-conform manner, it's most likely that the battery is worn out and must be replaced.
This is a relatively simple process, but you will have to be cautious not to cause damage to the electronics inside the fob. If you're not sure what size battery is required by the fob then look for a label on the side of the. You can also utilize a multimeter to check the old battery and see whether it's still in use.
Take out the old battery and replace it with a new one once you've found the correct one for your key fob. Snap the two pieces of the fob together, and you're all set. Get a few batteries so that you'll have them to replace the battery if your key fob becomes lost or worn out. You'll avoid having to replace your key fob in the future.
Electronics
Key fobs that are used to lock and unlock vehicles remotely are powered by batteries. Depending on how often you use your key fob, it's unusual for the battery to fail or for the electronics inside the key fob to degrade. It's crucial to replace your SAAB key fob battery as soon as possible to prevent it from locking and unlocking your car accidentally.
Fortunately, changing the battery or electronics in a SAAB key fob is a relatively simple process. It does not require any special tools or equipment, and you could do it at home, if you are able to do it. It is essential to carefully remove the electronics from the case. If you force the case too hard, they may be damaged.
Owners of SAAB 9-3 vehicles often lose their sole key. You could have to pay an enormous amount to purchase a replacement key from the dealer and then wait weeks before receiving it. However, there's a much cheaper way to acquire a new key for your car - our Oakland mobile SAAB locksmith will cut you a brand new Toyota key and program it into your immobilizer.
A new Toyota key is about $120 that's a small fraction of the price that dealers charge. It also cuts down on the cost of towing your vehicle to the dealership and the time spent waiting for them to do the job.
Reprogramming
There's a good chance that you'll need to replace the manual key in your car. It's a simple procedure and doesn't require any special tools. Insert a flathead into the slot in the middle of your case. Simply open the case and you'll be able take out the old key fob. The battery and electronics are easy to remove, however, you must be careful not to scratch the plastic.
In the past, it wasn't unusual to steal your neighbor's Volkswagen Golf 2 2. Nowadays, however automobiles are using advanced technology to make them difficult to hack into. This isn't because of the metal portion of the car keys but rather the electronic chip that is embedded in them. This is why it's a good idea purchase an additional key fob, or reprogramming an key fob from a saab.
The cost for reprogramming the key fob can be a bit expensive depending on the year of your vehicle and model. You should consult the nearest locksmith and provide the year the model, year, and year of your car to receive an accurate quote. This will help you know whether or not the service is worth the cost. You should also get an emergency key in the event that you lose your other keys. You'll save a lot of money in the end.
Take off the manual key
All modern key fobs whether they're used as car keys or to start the vehicle using a push-button, contain backup keys built-in. They can be used as a physical key in case your fob's electronic circuits fail or get damaged. If you have one of the key fobs listed above and are finding that it's not unlocking your car as easily or sending a signal to your vehicle that lets you know when you press the starter button, it's likely that your backup key is dying.
There are saab spare key of quick solutions that can be made to alleviate this issue, but in the long time, you'll need to have the battery replaced as soon as you can. Replacing the car key fob battery is actually quite simple and there are many YouTube videos that can guide you through the procedure step-by step.
Depending on the nature of damage your device has suffered, you may need to replace parts or do other more extensive work to get it back in working order. It could be a cracked or oxidized circuit board, or tiny electronic components that aren't fully bonded to it. Ask a mechanic about the most cost-effective option is for repairing or replacing the remote key fob of the saab.
